Multifunctional ultrasonic cat dog animal repeller

Product Description

Description of products:

The device use microcomputer control circuit, emit ultrasonic, strong flash, high-decibel sound waves to drive away animals (such as cats, dogs, birds, foxes, mice, etc.), the device had 5 working modes, you may select it according to differnet environmental needs. 
1).Mode one with Led light: Ultrasonic + Alarm + Flashing

2).Mode two with green LED light (brighten long time): Flashing

3).Mode three with red LED light (brighten long time): Ultrasonic + Alarm

4).Mode four with the red LED light flash: LED lighting, last *0 seconds

5).Above all 4 modes are triggered

Mode five with the green LED light flash: Ultrasonic with long time working with automatic (without trigger, without passive infrared) 

Method:
1.Put on the battery or plug unit into socket,the head of 8 LED light will flash and indicate the power has been connected, 2 second later the device prepare for work. Long press the A( refer to photo ) the yellow LED auto turn on and enter into the first working mode, after about *0 seconds into the alert mode, when the passive infrared probe to the target, trigger the first mode work(ultrasonic + alarm + falishing), work continued *0 seconds enter into the alert mode again.

2.You can choose different working mode according to different using environment, after the power turn on and long press the A enter into the state of choose working mode, then press the A to choose the working mode (yellow LED, green LED last long time, red LED last long time, the red LED flash and the green LED flash)

3. The conversion time of five modes, need *0 seconds enter into the alert mode and the first foure modes are all woking by the passive infrared. working cycle is about *0 seconds.

4.Long press the A, turn off the power(turn off all LED), the device stop working.

Technical data:

1.Power Supply: *-volt battery stacked or a mains
powered 9V adaptor.
2.Passive infrared area: *0 square meter.
3.Passive infrared angle: **0 degree.
4.Frequency range:****6KHZ.
5.Audio frequency:app 7KHZ.
6.Output sound pressure : **0 dB.
7. Fully waterproof.

How it works:

1. Select working mode you want.
2. Internal sensors detect the moving body of cat,
dog, mouse etc when they enters into the device's
field of view.
3. The selected working mode will be triggered.

Attention:

1.In order to make the device working ,
we strongly suggest use the adapter(DC 9V,
**0mA) if the environment allowed.
2.Do not point towards anyone's ear.
3.This device is warter proofed but not dip it into
the water.