PT-80 1016 PDH Equipment

Product Description

Brief Introduction

PT**0 ***6 PDH equipment is point-to-point optical transmission equipment operating at **0Mb/s bit rate. It adopts 1U high standard *9" rack. It is composed of 1*1 optical interfaces, *6 E1 interfaces, 4 electrical ETH interfaces or 3 electrical ETH interfaces and 1 SFP **0M optical ETH interface, 1 EOW interface, 1 ETH NMS interface, 1 RES**2 NMS interface, 1 RS**2 interface, 1 Alarm interface, support dual power : **0VAC power and 1 **8VDC power.

PT**0 ***6 PDH Equipment supports RS**2 and ETH network management; it can manage the PDH equipment through the whole WAN network. It realizes remote update function, Alarms, performance monitor, and parameters setting are available through the ETH NMS interface.

The equipment is featured by very compact, minimum cost and low power consumption. It is ideal for application areas such as remote transmission in point to point



Main Features

* Networking ability, can build up PDH network through the WAN network; 

* Support RS**2 and ETH NMS management, and user can manage all the PDH equipment through WAN network;

* Support Remote update function;

* Alarms, performance monitor, and information about the local/remote equipment status are available;

* Optical interface: **0Mb/s, *0Km transmission without repeater, support 1*1 production;

* Providing *6 E1 interfaces, local/remote loopback is supported

* 4 ETH interfaces, and user can select 4 electrical ETH interfaces or 3 electrical ETH interfaces and 1 **0BASE/FX SFP optical ETH interface by DIP switch, supports special VLAN, VLAN, broadcast protection, and enable or disable the ETH interface;

* Providing Engineering Order Wire (EOW), ETH NMS interface and RS**2 interface (NMS) for equipment management;

* Provide 1 RS**2 interface for user application;

* Both AC **0 and DC**8 are available;

* Single board design, 1U high, and *9 Inch wide.



Technical Specification

* Optical interface

- Speed: **0Mb/s± *0ppm

- Output optical power:≥**5dBm

- Receiving sensitivity:≤**5dBm

- Optical wave length: ***0nm/***0nm

- Optical interface connector: SC/FC

* 2M interface

- Bit rate: ***8Kbps*0ppm

- Code type: HDB3 code, conforming to G.**3 standard

- Input impedance: *5 (unbalanced interface), **0 (balanced interface) optional

- Frame structure: Conforming to G.**4, G.**6

- Compression law: Conforming to G.**1

- Level:2.*7V*0%

* ETH interface (*0/**0M UTP)

- Speed: *0/**0Mbps, half/full duplex auto-negotiation

- Standard: Compatible with IEEE **2.3, IEEE **2.1Q (VLAN)

- Connector: RJ*5

* ETH interface (**0BASE/FX) 

- Speed: *0/**0Mbps, half/full duplex 

- Standard: Compatible with IEEE **2.3, IEEE **2.1Q (VLAN)

- Connector: RJ*5

* Order Wire interface

- Telephone set: standard 2 line telephone

- Bandwidth : *4kb/s

- Coding: SFP/LC

* Dimension and weight

- Dimensions: **0mm(w)×**0mm(h)× *4mm(d)

- Net weight: 4kg

* Power Supply

- Input voltage: Standard value **8Vdc and **0VAC

- Voltage range: **6Vdc to **2Vdc, **6VAC~**4VAC

- Power consumption: <*0W

* Operation Environment

- Working temperature: **0°C ~ *0°C

- Working Humidity: 5%~*5 % (no condensation)

- Storage temperature: **0°C ~ *0°C

- Storage Humidity: 5%~*5 % (no condensation)