SNF-A(Sodium Naphthalene Sulphonate Formaldehyde A)

Product Description

Sodium Naphthalene Sulphonate FormaldehydeSpecification: 
Solid Content  :*6.*2%

PH value :8.3 

Chlorides Content :0.*5%

Sodium Sulfate Content :4.3%

Uses 
Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. 
Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation

Addition Rates 
Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.*5%. 
Sodium Naphthalene Sulphonate Formaldehyde Direction 
Prepare solutions as required. 
Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: *0%). 
The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. 
Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling 
For powder: Woven fabric bag with plastic liner. Net weight: *5kg +/- 0.1 kg

Packing, storage & transportation:

1, Packing: *5kg in PP woven bag lined with plastic film. 
2, Storage: Kept in dry and ventilating place, prevent from rain and moisture when storage; if agglomerated, please crush and make it into solution, and its effect will be the same. 
3, Transportation:non-toxic, harmless, non-inflammable and non-explosive chemicals, it can be transported in truck and train.