Sodium Lauryl Ether Sulfate 70%

Product Description

Sodium Lauryl Ether Sulfate *0% (2 mole) (predominently C*2 – C*4) CAS No: *********2 Section2: Composition / information on ingredients Irritant R*1: R*8: Section3: Hazards Identification May cause some irritation to the mouth and upper digestive tract. May cause significant skin irritation especially if exposure is prolonged and / or repeated. Contact with eyes can cause severe irritation. If not washed out promptly, will injure the eye tissue and permanent damage may result. Section 4 : First Aid Wash out mouth with water . Do not induce vomiting . Seek medical advice. Wash the skin with soap and water. Seek medical attention if skin appears damaged. Immediately wash out eye with plenty of water for at least *5 minutes holding the eye open. Seek medical attention urgently. Section 5 : Fire Fighting Measures Fumes containing carbon dioxide , carbon monoxide and sulphure dioxide may be formed in large fires. Use powder , foum , sand, water spray. Avoid using large quantites of water. In case of fire , self contained breathing apparatus should be worn. Section 6 : Accidental Release measures Contain and collect spillage. Absorb on to sand / kleselguhr Failure to contain release must be reported to the local authority and Royal should be notified. May make floor very slippery. Wear impervious gloves/overalls and eye protection while clearing up the spillage. Do not wash into the drains. Place in plastic barrels for disposal. Dispose of in accordance with local authority regulations. Seek advice from the local waste authority or contact Royal Chemicals for guidance. Section 7 : Handling and StorageStore in plastic, plastic lined or stinless steel, tightly closed containers at between 5 and *0 degrees Centigrade. Do not store close to storage oxidising agents which could aggravate any fire situation.