WXTF AC Resonant test system

Product Description

WXTF Cable Resonance Test System Application The AC withstand voltage test device is suitable for AC withstand voltage test of transformers, circuit breakers, switches, GIS systems, cables, bushings, insulators and other equipment. With high voltage overvoltage protection, low voltage overcurrent protection, as well as detuning protection, zero position, flashover protection, emergency shutdown, undervoltage protection and other multiple protection functions. It can meet the test requirements of high voltage and low current equipment, and meet the test requirements of low voltage and high current equipment. It has a wide range of application. The frequency adjustment of the AC withstand voltage test device is divided into coarse adjustment and fine adjustment, and the test resonance point can be automatically found to ensure that the resonance frequency does not drift during the whole test process; the required power supply capacity is small, and the power supply required for the test is only tested. The capacity is 1/Q; the volume is small and the weight is light, which is 1/**1/5 of the common test device; the resonant power supply is a resonant filter circuit, which can improve the waveform distortion of the output voltage and obtain a good sinusoidal waveform, effectively preventing Harmonic peak to the wrong breakdown of the test sample; with a variety of working modes, **0V or **0V single-phase power supply, convenient on-site power; multi-mode, modular combination, can be combined and easy to operate, convenient for on-site use. Introduction WXTF makes the reactor and tested capacitor in resonant by adjusting the frequency of the power source, to get high voltage and heavy current from measured equipment. Now it is a new method and trend for high voltage test and widely used. WXTF uses special SPWM digital wave-generate chip, resolution is *6 bits, the frequency adjustment fineness could be 0.1Hz if the frequency was *0~**0Hz; adopts sine asynchronous fixed wave carrier modulation, to ensure the waveform output is good in the whole frequency range; adopts advanced IPM module, ensure the stability and safety of the device under minimum weight. Features 1.Small in volume, light in weight. 2.This system need one person to carry the device less than *0KG, two people less than *0KG. Suitable to carry on site. 3.Power supply, Single phase: **0V or **0V, convenient to get power on site. 4.Reactor uses epoxy cast, beautiful and reliable, suit for all kinds of cables. 5.**0kV and above voltage level cable withstand voltage test use oil-immersed reactors, when the weight of single machine is more than **0kg, optional dedicated small electric cranes Parameters Note: Capacity(KVA) and voltage(KV) of test system can be produced according to your requirement. Rated output voltage ≤0~**0kV(AC effective value) Output frequency *0~**0Hz Resonate voltage waveform Sine wave, distortion ≤1.0% Full load working time Continuous working time: *0min System quality factor ≥*0 under maximum load Frequency adjustment 0.1Hz Instability ≤0.*1% Power supply Single phase :**0V or three phase :**0V±*0%, frequency:*0Hz±5% Configuration table of cable (≤ *5kV) voltage withstand device: Model Control cabinet Reactor(dry type) Excitation transformer (dry type) Divider Application WXTF**4/*2 2.5kW 1A/*2kV:2 sets 2.5kVA/1kV *5kV *0kV cable≤1km WXTF**8/*2 4kW 2A/*2kV:2 sets 4kVA/1kV *5kV *0kVcable≤2km WXTF***2/*2 6kW 2A/*2kV:3 sets 6kVA/1/3kV *0kV *0kVcable≤3km *5kVcable≤1km WXTF***6/*2 7.5kW 2A/*2kV:4 sets 7.5kVA/1/3kV *0kV *0kVcable≤4km *5kVcable≤1km WXTF***4/*2 *0kW 2A/*2kV:6 sets *0kVA/1/3kV *0kV *0kVcable≤6km *5kVcable≤2km WXTF***0/*2 *5kW 2.5A/*2kV:6 sets *5kVA/1/3kV **0kV *0kVcable≤8km *5kVcable≤2km WXTF***0/*2 *5kW 2.5A/*2kV:8 sets *5kVA/1/3/5kV **0kV *0kVcable≤*0km *5kVcable≤4km **0kV cable≤1km Configuration table of cable (≥**0kV)voltage withstand device : Model Control cabinet Reactor (oil immersed) Excitation transformer (oil immersed) Divider Application WXTF****0/**0 *0kW 5A/**0kV:2 sets *0kVA/3/5kV **0kV *5kVcable≤2km **0kVcable≤2km WXTF****0/**0 **0kW 5A/**0kV:4 sets **0kVA/3/5/*0kV **0kV *5kVcable≤3km **0kVcable≤3km **0kVcable≤1.5km WXTF****0/**0 **0kW 4A/**0kV:4 sets **0kVA/5/*0kV **0kV **0kVcable≤5km **0kVcable≤3km WXTF****0/**0 **0kW 8A/**0kV:4 sets **0kVA/5/*0kV **0kV **0kVcable≤*0km **0kVcable≤5km **0kVcable≤1km