Hebei Xinqi Pipeline Equipment Co., Ltd

A tee is used to combine (or divide) fluid flow. Tees can connect pipes of different diameters or change the direction of a pipe run, or both. Steel t

An elbow is installed between two lengths of pipe (or tubing) to allow a change of direction, usually a 90 or 45 angle; 180 elbows are also available.

3PE : its full name is 3 layer Polyethylene the 1st layer is Epoxy powder the 2nd layer is adhesive primer the 3rd layer is PE use: Anti-corrosion

~A tee is used to combine (or divide) fluid flow. Tees can connect pipes of different diameters or change the direction of a pipe run, or both. Steel

~A tee is used to combine (or divide) fluid flow. Tees can connect pipes of different diameters or change the direction of a pipe run, or both. Steel

~A tee is used to combine (or divide) fluid flow. Tees can connect pipes of different diameters or change the direction of a pipe run, or both. Steel

A reducer is the component in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter). There are two main types of red

A reducer is the component in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter). There are two main types of red

rubber lined elbows is a kind of rubber lined fittings butt welding fittings can be rubber lined, PTFE lined or PE lined or PP lined some clients ma