911 Two-component Polyurethane Waterproof Coating

Product Description

Product features

• Two-component polyurethane Waterproof Coating，easy to apply.
• With moderate viscosity, it can be self-leveling after construction under normal temperature.
• Excellent physical & mechanical properties, good elasticity, high strength and firm bonding to base surface.
• Integral solidified film ability is high, and waterproof performance is good.
• Aging resistance, weather resistance, oil resistance and water resistance are remarkable and some acid &alkali resistance. Besides its performance life is long.

Points for Attention

• The rest coating should be sealed at once to prevent curing.
• The mixture of component A and B should be used up within *0 mins after being stirred evenly.
• Keep the waterproofing layer from being damaged during and after the application.

   

  Construction Requirement 

• Keep the substrate clean, dry, smooth, firm, dustless and greaseless.
• Base treatment of the working face: Mix coating materials uniformly first, then dilute the mixture with ***0% solvent to and then brush the base with it.
• Mix the component A and B evenly at the ratio of 1:2 when applying with rubber scrapers or plastic scrapers. Make sure the total coating film is 1.**2.0mm, and brush for **3 times.
• Charge mixture is supposed to be used up within *0 minutes under normal temperature.
• Internal & external corners and junctures of pipes could be reinforced through non-woven fabrics.
• If to accelerate curing, you can add a little catalyst while applying in low temperature. If the mixture is too dense, it could be diluted by no more than *0% diluting agent of the mixture before applying.

   

  Main Applications

  Applicable to waterproofing projects of roofs, basements, balconies, kitchens and lavatories.

   

  Storage and Transportation 

• **1 Elastic Waterproofing Coating is supposed to be sealed and stored in a cool and dry place, free from sun exposure, damp and fire.
• Storage period is *2months.
• Packing is metal drums, which should pile upright.
• Piles of buckets should not exceed 4 layers.