WP-SBS Modified Bitumen Waterproofing Membrane

Product Description

Introduction:

Joaboa Tech take the “Skin” type waterproof thought, according to the features of construction site, on the basis of width elastomeric modified bitumen waterproofing membrane, combining with features of wet-application self-adhesive membrane, use advanced equipment to produce 2 meters width that WP-SBS wet-application width elastomeric modified bitumen waterproofing membrane(Hereinafter referred to: WP-SBS membrane).WP-SBS is made of bitumen modified withStyrene-Butadiene- Styrene (SBS)as dipping and painting. Its upper surface covers PE membrane and color sand or schist, and lower surface is made of isolation material. Products correspond to the national standards GB*********8(elastomeric modified bitumen waterproofing membrane), paste by cement or cement mortar, and construct on the wet base, achieving tight and full adhesion with substrates, eliminating fluid-channeling layer, all above contribute to making a reliable “Skin” type waterproof system, which is a breakthrough innovation in ordinary modified bitumen membrane.

Poduct Feature: 

�

1. 2m width, Reduce Overlap

2.Simple and Efficient Construct, Greatly Saving Construct Period

3.Adhesive Reliable, Avoid Fluid-channeling

4.Advanced Production Line

5.Excellent Comprehensive Physical Properties

6.Stable Dimension

7.Wide Adaptability of Facing Material

�

Product Sort:

Divided intoⅠtype andⅡ type as physics performance

Matrix: PY, G and PYG

Upper surface material: PE film, color sand and schist

�

�

Specification:

�

PhysicalPerformance                                                         Enterprise Standards Q/ZB*******9

�

�

PS: Enterprise standard Q/ZB*******9 accord with standard of requirement GB*********8, and extra adds wet-application performance standard requirement.

Storage and Transportation:  

1. Different types and specifications of the product should be piled up respectively, not be mixed.
2. Avoid sun and rain, pay attention to ventilation. Storage temperature should not be higher than *0℃.

3. Membranes should be flat during transport and storage, flat stacking height not more than four levels. Prevent tilt or pressure during transportation, sealed by the felt cloth if necessary

4. Under the normal storage and transport conditions, storage period is one year from the date of production.