Electric Distribution Box

Product Description

1,Standard configuration: mounting plate, locking system, gland plate, sealing gasket and fixing accessories.

2,Material and thickness: cold-rolled sheet steel

Door: 1.2mm or 1.5mm

Body: 1.5mm or 2.0mm

Mounting plate: 1.5mm or 2.0mm

When the enclosure is less than **0mm high, body and door is 1.2mm THK, mounting plate is 1.5mm THK; if over **0mm high, body and door is 1.5mm THK, mounting plate is 2.0mm THK.

3,Surface: epoxy thermosetting powder coating, textured finish

4,Color: RAL ***2, RAL ***5

5,protection degree: IP *6





Craftsmanship Feature

1. There are strengthening strips with pilot holes welded to both sides of the door by using the self-tapping M4 screws for the convenient installation (If the enclosure higher than **0mm)

2. There's one foam PU sealing gasket inside the door for the water and dust proof.

3. The door can be opened **0° By the plugging hinges

4. The slots design of the enclosure prevents dust and water from entering into the enclosures plus the good coordination with sealing ring, which supply a good protection of the enclosures.

5. There're 4 hanging holes in the back of the enclosures, which is very convenient for the installation by the wall mounting brackets, that's going to be Ordered separately.

6. The door can be switched by both left and right side,we can add plexiglass door and inner door as blow selection table.



Sales E-mail (*@********************span>