Metal Electrical Wall Mount Enclosure

Product Description

1,Standard configuration: mounting plate, locking system, gland plate, sealing gasket and fixing accessories.

2,Material and thickness: cold-rolled sheet steel

Door: 1.2mm or 1.5mm

Body: 1.5mm or 2.0mm

Mounting plate: 1.5mm or 2.0mm

When the enclosure is less than **0mm high, body and door is 1.2mm THK, mounting plate is 1.5mm THK; if over **0mm high, body and door is 1.5mm THK, mounting plate is 2.0mm THK.

3,Surface: epoxy thermosetting powder coating, textured finish

4,Color: RAL ***2, RAL ***5

5,protection degree: IP *6

Craftsmanship feature

1,There are strengthening strips with pilot holes is welded to both  sides of the door by using the self-tapping M4 screws for the convenient installation (If the enclosure higher than **0mm)

2,The foam PU sealing gasket inside the door.

3,The door can be opened **0°by the plugging hinges

4,The slots design of the enclosure prevents dust and water entering into the enclosures plus the good coordination with foam sealing gasket, which supply a good protection of the enclosure.

5,There are 4 hanging holes in the back of the enclosure, which is very convenient for installation by the wall mounting brackets.

6,The door can be switched by both left and right side.